WEAR IN THE MICROSCALE OF CAST IRON PISTON RING/COMPOSITE CYLINDER LINER CONTACT
Journal Title: Tribologia - Year 2015, Vol 261, Issue 3
Abstract
The paper presents an attempt to explain the mechanism of wear in a contact cast iron piston ring/composite cylinder liner analysed at a microscale by using of lamellar model of a pearlite. For calculation of local stresses and strains levels in a pearlite, which constitutes the matrix of cast iron being in a contact with reinforcing fibres in a cylinder liner, a geometrical model was built and calculations using FEM were carried out. Stereological parameters of pearlite grains and fibres in a composite were used for the construction of the geometrical model. Local distributions of stresses and strains in cementite and ferrite lamellas have been acquired as a result of calculations carried out. Stresses calculated by using the simplified model (isotropic pearlite grains) are different from those calculated by using the enlarged model (cementite and ferrite lamellas in pearlite grains). These values allow one to explain the wear mechanism of the investigated contact.<br/><br/>
Authors and Affiliations
Andrzej POSMYK, Henryk BĄKOWSKI
Keywords
Related Articles
- EP ID EP257783
- DOI -
- Views 53
- Downloads 0
DEFORMATIONS AND FRACTURE OF COATING-SUBSTRATE SYSTEMS UNDER CONTACT LOAD
Thin coatings are particularly applied to machine elements and tools working in contact. Theoretical solution of contact for coated systems is still not available, because of the difference in elastic and plastic propert...
EFFECT OF THE HARDNESS AND ELASTIC MODULUS ON THE WEAR RESISTANCE OF THE COMPOSITE COATINGS
The analysis of the micromechanical properties of the composite coatings in comparison with their frictional wear resistance is presented. Nanocomposite nc-TiC/a-C and MoS2(Ti,W) coatings and CrN(Cr/CrN)5x multilayer coa...
THE INFLUENCE OF THE STRUCTURE OF ETHOXYLATED FATTY ALCOHOL ALKYL CHAIN ON TRIBOLOGICAL PROPERTIES OF THEIR AQUEOUS SOLUTIONS
The influence of the structure of ethoxylated fatty alcohol alkyl chain on physical-chemical and tribological properties of their aqueous solutions is analysed in the paper. Aqueous solutions of mixtures of two alcohols,...
WŁAŚCIWOŚCI TRIBOLOGICZNE STALI ŚREDNIOWĘGLOWEJ Z POWŁOKĄ HYBRYDOWĄ TYPU Cr/CrN, WYTWORZONĄ METODĄ PVD
W pracy omówiono wyniki badań budowy, mechanicznych i przeciwzużyciowych właściwości powłok hybrydowych typu Cr/CrN, składających się z chromu i azotku chromu, wytworzonych na powierzchni stali średniowęglowej C45 metodą...
ANALYSIS OF CONTACT AND BENDING STRESSES IN GEARBOX SWITCHING UNDER LOAD
The work analyses contact stresses that occur within the active surface of toothed gears as well as bending stresses that take place at the tooth root. Contact stresses have been designated at the beginning of the single...